GENERAL
Model KTM 660 Rally Factory Replica 2003
Category Off-road/Enduro

ENGINE
Type 654 cc, liquid cooled, single cylinder, 4-stroke
Bore x stroke (mm) 102 mm x 80 mm
Compression ratio 11.5:1
Valves OHC, 4 valves/cylinder
Fuel system Keihin FCR 39
Ignition Kokusan DC-CDI 4K5 
Power 65 hp (48.5 kW) @ 7500 rpm
Torque 69.5 Nm (512.6 ft. lbs) @ 6000 rpm

TRANSMISSION
Gearbox 5 speed
Final drive Chain

CHASSIS
Front suspension WP-USD 48 Multi Adjuster, 295 mm travel
Rear suspension WP - Monoshock, 320 mm travel

WHEELS
Front tyre 90/90-21
Rear tyre 140/90-18
Front brakes single 300 mm disc with 2-piston calipers
Rear brakes single 220 mm disc with 1-piston calipers

DIMENSIONS
Overall length 1945 mm (76.6 inches)
 980 mm (38.6 inches)
Wheelbase 1510 mm (59.4 inches)
Ground clearance 320 mm (12.6 inches)
Fuel capacity - reserve 48 l (12.7 gallon US)
Dry weight 162 kg (357.1 pounds)

Yes, the all important machine! Bob has acquired himself a used KTM 660 Rallye Replica. These bikes were in production from KTM and can still be obtained through special order $$$$ or on the open market. Bob’s bike is currently being rebuilt and fully rallye prepared by himself and the good folks at Cycle Improvements.

Bob’s current evening project!
The 660 Rallye Replica is being completely re-done from the frame up and will look like new. More pics and descriptions to follow as the bike nears completion.